SILACRYL-WET - Solution Sealers

SILACRYL-WET

Description:

SILACRYL Wet Look is a high performance solvent based sealer, designed to beautify and protect masonry surfaces. Only quality acrylic resins are used in the manufacturing of SILACRYL to guarantee durability, UV Protection, and high gloss levels. SILACRYL is widely regarded as one of the best slate sealing products on the market.

Advantages:

Suitable for internal and external use

Gives a wet look (gloss or matt) which enhances the natural colours of the surfaces, like slate and sandstone

Seals against food, soils, grease, oil and inhibits staining

Seals Limestone dust into concrete to prevent leaching and a constant need for sweeping

Available in Gloss or Matt finish

Is easy to reseal without stripping

Does not yellow externally

Australian owned and manufactured in Australia

Characteristics:

Colour: Clear

Weight: 0.90

Solvent: Hydrocarbon

DG Class: 3

U.N Number: 1263

Coverage: 8 – 10 sq m per lt (depending on porosity)

Recommendations:

Sandstone
Slate
Masonry blocks
Granite
Brickwork
Concrete pavers

Disclaimer – User Guide

Solutions - Sealers for Stone & Tile believes the information contained in this document is accurate as general advice only. As general advice only it has been prepared without taking into account the objectives, problems or needs of the reader. Solutions – Sealers for Stone & Tile has presented this information as a guide only and accepts no liability for any loss or damage caused by any error in, or omission from, this document. Solutions – Sealers for Stone & Tile has no control over the use or misuse of this product, therefore no warranty expressed or implied shall be given. Solutions – Sealers obligations shall be limited to only replacing product PROVEN defective. The user MUST educate themselves on the performance value, application rates, substrate type and environment before product is applied, a TEST area is always highly recommended.

SOLUTIONS – Sealers For Stone & Tile

SOLUTIONS – Sealers for Stone & Tile are proud Australian manufacturers that produce a variety of quality sealing products to protect and enchance masonary surfaces including natural stone, concrete pavers, procelain tiles and grout. With years of research and product development, since our conception in the early 90’s we have produced a strong product base that competes on the world market. Our products are proven to reduce the damaging effects of common staining, efflorescence (salt attack), graffiti and water ingress.
SOLUTIONS – Sealers continue to develop innovative ways to meet our customer needs, be it performance based or environmental. We have a variety of sealers to combat the complexity of natural stone on the market, as well as Green approved (Good Environmental Choices Australia) products for the environmentally aware.

1300 4 STONE